Skip to main content

Full text of "SUM The Sinclair/Timex Users Magazine"

See other formats


ry 


a 
TS 1000 TS 1500 TS 2068 


THE SINCLAIR/TIMEX USERS MAGAZINE 


$300 


Volume IV APRIL 1986 Number 4 


Sinclair Research Sells Out! 


THE WALL STREET JOURNAL TUESDAY, APRIL 8, 1986 35 


Amstrad Purchase of Sinclair Research 
Is End of an Era in British Computers 


By PAuL HEMP 
Staff Reporter of Tue WALL STREET JOURNAL 

LONDON — Amstrad Consumer Elec- 
tronics PLC bought the computer business 
of troubled Sinclair Research Ltd. for the 
equivalent of $7.3 million. 

The sale represents the end of an era in 
the British computer business. Founded by 
British entrépreneur Sir Clive Sinclair, Sin- 
clair Research manufactured the first 
computer to sell in Britain for less than 100 
pounds—currently the equivalent of $145— 
and says it was the first company in the 
world to sell more than a million com- 
puters. 

The sale was unexpected. A sales slump 
early in 1985 had pushed the once-success- 

re, ful computer maker 

mee into the red, forced 
it to twice resched- 
ule its overdue debt 
and prompted specu- 
lation among com- 
petitors that the 
company might be 
forced into receiver- 
ship. But Sinclair 
-jsaid in February 
hat it would begin 
selling a new model, 
the ZX 128, and that 
Sir Clive Sinclair its financial prob- 
————————_ lems had been re- 


solved. Its computer business accounted 
for about 90% of its revenue last year. 

Amstrad, a British microcomputer com- 
pany, bought the Sinclair brand name and 
world-wide rights to sell and make Sinclair 
computer products. 


Manufacturing Plans 


Amstrad said it plans to begin manufac- 
turing Sinclair computers when contracts 
with existing suppliers expire later this 
year. 

Alan Sugar, Amstrad’s chairman, said 
the Sinclair line of computers, less expen- 
sive machines designed mainly for home 
entertainment, would complement Am- 
strad’s line of business-oriented home com- 
puters and word processors. 


Mr. Sugar added that Sinclair products, 
which have been sold primarily in the 
United Kingdom and several other Euro- 
pean countries, will benefit from Am- 
strad’s world-wide distribution network.. 
Sears, Roebuck & Co. of the U.S. in March 
agreed to market Amstrad’s Personal 
Word Processor in the U.S. and Canada. 

With the addition of Sinclair’s computer 
business, Amstrad could. expect sales of 
$58 million and earnings of between $7 mil- 
lion and $12 million in the first year, said 
Richard Budgett, an analyst at W. Green- 
well -& Co.. 


Amstrad, which sold 750,000 computers 
world-wide in 1985 and expects to sell one 
million this year, says it holds about 20% 
of the U.K. home-computer market, based 
on units sold. Sinclair, which sold about 
400,000 computers last year, holds about 
40% of the home-computer market. 
Sinclair Selling Stakes 

Sinclair also said it will sell parts of 
its other businesses. It has sold a majority 
stake in its telecommunications-products 
business to parties it declined to identify. 
In addition, Barclays Bank PLC and other 
investors have taken a minority stake ih 


‘the company’s semiconductor unit. 


When all transactions are complete, 
Sinclair Research ‘“‘won’t owe any money 
and will have some assets,”’ Sir Clive said. 
The company rescheduled about $22 mil- 
lion of debt last August, and had paid cred- 
itors about $14.6 million before yesterday's 
transactions. 

As for Sir Clive, he will essentially start 
over. A new company will be formed to do 
research for other companies, and Sir 
Clive and fellow researchers will work on 
developing new products in a variety of 
fields. ‘‘I always said I was an inventor,” 
he said. ‘‘Once a product is developed, 1 
want to get out.” 


Also Inside: Printers, Interfaces, Reviews, Programs, & News! 


Letter from Editor 


With all the changes that have been 
taking place over the past several weeks, 
it's going to be interesting to see what 
will happen next! The recent Amstrad deal 
with Sinclair will certainly be "the buzz" 


at the Midwest TS Computerfest the first 
of MAY, 

I do hope to see a lot of you there at 
the show. It will be exciting! Trust me! 

The introduction of the Timex (of 
Portugal) computer line in Mexico will 
certainly incite new furor in this 
hemisphere over our computers. Hopefully 


some of it will slip across the border and 
provide a new outlet of equipment and 
software for us. 

Those of you who only have the ZX 81/TS 
1000/1500, don't despair; May's issue will 
be devoted (almost) entirely to you! We 
have found several dealers who still have 
stock on some good software titles and 


hardware.. just for you! For one supplier, 
read the classified in this issue. 

would like 
readers, 


If you have some ideas you 


to share with us and other send 


a 


os’ AT LAST'! AVERY AFFORDABLE COMPUTER 


WE? AT AVERY AFFORDABLE PRICE 


POWERFUL FULLY PROGRAMMABLE WITH 2K OF MEMORY—-PORTA- 
BLE—~67/8 x 1-38 INCH MODULE SINGLE-KEY ENTRY COMMANDS— 
OURABLE 40 KEY MEMBRANE TYPE KEYBOARD.-Z80A BASED FOUR 
CHIP DESIGN—EDUCATIONAL—UNIQUE SYNTAX.CHECK REPORT 
@ CODES FOR ERROR IDENTITY—GRAPH DRAWING AND ANIMATED DIS- 
ff §=PLAY—ACCURATE TO 9-1/2 DECIMAL PLACES FOR FULL RANGE MATH 
AND SCIENTIFIC FUNCTIONS--AT AN AFFORDABLE F'RICE 

WE CANNOT TELL YOU THE MAKE OF THE COMPUTER BUT IT WAS 
MADE BY A FAMOUS WATCH COMPANY. THEY USED TO SELL FOR 
$99 05 

WE BOUGHT OUT WHAT THE FACTORY HAD LEFT IN 8TOCK AND HAD 
TO REMOVE THE LABELS, THESE UNITS ARE UNPACKAGFD. LESS THE 
9V WALL ADAPTER AND MANUAL. BECAUSE THIS IS A DISCONTINUED 
ITEM THERE IS NO WARRANTY 


GET THEM WHILE THEY LAST 


SageLanreran 
Santenasaqce 
Seesrerasses 
aGaaaananes 


LIMITED SUPPLY 


Buy tet UNIT FOR $19.95 BUY 2nd FOR $16.95 9V DC WALL ADAPTOR $495 
BUY THE 3rd UNIT (NON OPERATING FOR PARTS)$10.95. MANUAL (OVER 150 PAGES) $2.95 


See September 1984 issue of 73 for TIMEX/RTTY article 


CHIP BONANZA at THESE Prices THEY ARE A STEAL) 


2708 $100 EA OR 10 FOR $ 900 HAUS 

ZW. 500 ..... $225 EA OR 10 FOR $20.00 

2732 .. $325 EA OR 10 FOR $3000 COMPUTER 

2784 $400 EA OR 10 FOR $3500 GOODIES 

27138 $700 EA OR 10 FOR $6000 au Gee 

602 j $495 EA OR 10 FOR $4500 

6810 (REG $3 95) $195 EA OR 10 FOR $18.00 » (reg. $99.05 ... now $50.95 


68409 (REG $19) $596 EA OR 10 FOR $5000 Coleco cassette player 
*8A21 (REG $9.95) $2.96 EA OR 10 FOR $2500 (battery op.) $20.08 
aie reser Ferree ®V. @ 650 Ma. adapter (needed 
: t * 7 
pen SPECIAL) : $208 lor 16K RAM packs) 3705 
TMS 9Q00NL ICRU-P £4 FIN B IT OB + 16 BIT CPU $495 16K RAM pack module, new 
TMS 980'NL MICRO-P PSI .329 $2906 
TIM G904AN\ MICRO-F CLOCK GEN. AND DRIVER a $595 16K RAM pack module, 
TMS 991BANL MICRO P COLOR GRAPHICS AND DISPLAY $995 refurbished $1995 
q x -T $995 
KEYBOARD: (90/4) 48 KEYS MEASURE 4 x 10(HL-TER) PCA TV interface cable 
AFPLE Il and APPLE li. COMPUTES % fees +» $1.28 
MAIER SMES Hilly papitata $180 Cassette Software: Dual [ack cassette intartace 
| nays cassatie software $2.50 


ty C&SA and keyboard saps ' ¢ 
i send for list (reg $0.95-514 5) 

ralaty avaviabie Call or Vinte Hare Speciel Price: 1 tor $2.95; TviComputer game switch 

3for $1095, 6 for $19 50 ‘ 


10 1or $2950; 20 for $50.00 


es.nbad above. fully aasem. 
bled & lested $350 plus shipping 
APPLE POWER 

SUPPLIES $299 
SHIPPING INFORMATION OHDERS OVER $25 WILL BE SHIPPED POST-PAID EXCEPT 
ON ITEMS WHERE ADDITIONAL CHARGES ARE REQUESTEDON ORDERS LESS THAN 
$25 PLEASE INCLUDE ADDITIONAL $250 FOR HANDLING AND MAILING CHARGES 
MICHIGAN RESIDENTS ADD 4% SALES TAX SEND 20 STAMP OR SASE FOR FREE 
FLYER CANADIAN ORDERS ADO $500 POSTAGE IN US. FUNDS. 


HAL-TRONIX, INC. 
P.O. BOX 1101 - DEPT. HR 
SOUTHGATE, MICH. 48195 
PHONE (313) 285-1782 


oF lot Hal select 25 ditterent cas- 
settes (my choice) at 25 for $50 90!!! 


“HAL" HAROLD C. NOWLAND 
v 182 W8ZXH 


them in! We would love to hear from you. 
We can't always answer your letter, but we 
do try. 
If you have been waiting for the 

OF SUM, we should be shipping them by 
time you get this issue. We wish to 
apologize for the delay, but it was a 
much larger undertaking than we originally 
thought. It will contain the best 
information from previous issues back to 
our original TUG Newsletter which began in 
early 83. I will have some at the Show, so 
stop on by! 


BEST 
the 


-- Joe Williamson 


S 


TS 1000 


U 


TS 1500 


TS 2068 


THE SINCLAIR/TIMEX USERS MAGAZINE 
3224 Northwest 30th Avenue 
Gainesville, Florida 32605 
904/378-9000 or 462-1086 evenings 


EDITOR ees eae eae ae Joe Williamson 
PUBLISHER: causcceosc scene awe Richard Cravy 
secews Bill Woodward & John Monkus 


SUBSCRIPTION RATES 9/1/85 


Regular Subscription (U.S.) ............ $15.00/year 
Canadian Subscription ................ $18.00/year 
All other countries please inquire first 
Published monthly 


ADVERTISING RATES 9/1/85 


ttl IPA Get oor ara asehaycteransy aralecavewmeer aus ansrahe amie wees ar $75 
Half Page? is ssi cass deans amialnw aera einen oa eue oc $45 
Quarter Page: <5 soicisia'satsaw aaa anie ss tee ee a $25 
FiGhthiPAGe cin eos oe owen pene eeu eet ee cece $15 


These prices do not include artwork or ad layout. There 
will be an extra charge for custom ad work. Ads should 
be in our offices by the 10th of month of publication. 


Classifieds: $2.00 per line. FREE personal ads for 
subscribers (no dealers). 


SUBMISSIONS 


We are willing to pay for articles published (after 
editing). Our current rate is 10¢ per text line and 10¢ per 
program line (after editing). Authors should indicate if 
they wish to be paid when submitting material. 


CORRESPONDENCE 


Please provide us with all information on your mailing 
label in all correspondence. Your subscription expir- 
ation is printed on your label with four digits; the first 
two indicate the year, the last two the month. Please tell 
our advertisers you saw their ad in SUM. 


[LL ee 


VU 


rage 


Editorial on the Sinclair/ Amstrad Deal 


What a shock! Only days after coming 
out from under rigorous bank supervision, 
Clive Sinclair sells his computer company 
to Amstrad, his leading competition in the 
English home computing market. A _ larger 
scale version in the U.S. would be 
Commodore suddenly selling out to Atari! 

However, my feelings about this move is 
far different than my feelings when Timex 
left the American computer market. Here's 
why. For some time it has been evident 
that Clive was casting his eyes toward 
other endeavors. Scientific wizard he 
might be, but financial genius he wasn't. 
Sinclair Research has been fighting off 
bankruptcy for several months, and was 


under the control of a team assembled by 
their leading creditors. Many in the 
computer business were fearful of what 


would happen when control reverted to 
Clive Sinclair on about April 1. Eccentric 
as he was, he might have announced new 
products, cut off support for old 
products, announced another electric car, 
no one knew. What has’ transpired is 
probably the best possible outcome for 
those of us who love our Timex/Sinclairs. 

Who is Amstrad? The first time I heard 
of Amstrad was at last summer's Consumer 
Electronics Show in Chicago (see June 1985 
SUM). At the show Amstrad was showing 
their CPC6128, a 128K CP/M based computer 
with one disk drive, monitor and word 
processor for about $500! Amstrad first 
entered the English market as a 
manufacturer of high quality, low cost 
stereo equipment. 

In June 1984 they introduced their 
first home computer. Since then they have 
risen to become the #2 home computer 
manufacturer in England behind Sinclair. 
Financially they seem to have built a 
solid cash reserve and realize good 
markups on their products by manufacturing 


their machines themselves, different than 
Sinclair who always "farms out" their 
work. Further, they have gained the 


confidence of the British public at a time 
when many other English computer companies 
were having a hard time or even going out 
of business. 

Amstrad computers are not known so much 
for their technical sophistication nor are 
they considered on the leading edge of new 
research, using the venerable Z80 chip and 
the CP/M disk operating system. But their 
strength is being able to take time-tested 
technology and packaging it in new ways 
and at extremely attractive prices. Their 
marketing savvy is a wonder to behold. 

Sinclair on the other hand is just the 
opposite on almost every point discussed 
in the above two paragraphs. Sinclair made 
many technological firsts but financially 
failed to reap as he should have because 
of his lack of marketing ability. 

I believe that this “merger” is going 
to be a boon to us. Amstrad has indicated 
that it will strongly push the Spectrum 
line. I can envision the QL possibly being 
sold outright to a group of investors who 
will start a new company devoted 
exclusively to marketing and expanding 
this great Sinclair computer. Meanwhile, 
some of the advanced research already 
aearing completion in the Sinclair 
Research labs will surely show up in new 
Amstrad products, leading Amstrad to 
leapfrog their competition. Possible new 
products rumored include a combination IBM 
PC and QL compatible machine, portable 
computers with the outstanding Sinclair 
flatscreen, and a Macintosh/Atari ST type 
computer with color monitor and disk drive 
for $500! Now these are just rumors, but 
the two best companies in England to pull 
off such a feat have just become one, and 
no better chance exists than this to see 
such things come to pass. 

Amstrad has already established a small 
presence in the American market, and has 
already entered an agreement with Sears to 
help import and distribute part of their 
current computer line. 

-- Richard Cravy 


Producing Sprites on the 2068 


Back in September of '84, SUM published 
my program that showed how to print a 
pattern on the screen that was not a slave 
of the 8x8 pixel dimension, but it only 
worked vertically. At the time it seemed 
impossible to do the same thing hori- 
zontally without doing an endless 
character creation session. It was not 
worth it. 

At first I tried to poke the characters 
in real time to move the pattern right or 
left but it took too long. In order to 
move the pattern right or left rapidly, it 
is necessary to do the POKEing ahead of 
time. Lines 3000 to 3100 do this by 
setting up eight different character sets 
for the eight horizontal positions of the 
pixel pattern in the 8X8 character grid. 
This works because when you halve a binary 
number the pattern is preserved and 
shifted right one pixel. If an odd number 
is halved, that is the ones position is 
filled, that pixel is shifted two 
characters to the right. This shift is 
done by adding 128 to that character after 
its value has been halved. The first 
screen dump shows the eight USR character 
sets. 


Notice in the sets there are blank 
characters between every two filled 
characters because the sprite is two 


characters high. If the sprite were three 
CHR$ high the pattern would be three CHR$ 
and then the blank. To move vertically, 


USR graphics location is poked. This makes 


the pixels move vertically within each 
CHR$ and from one character to the next. 
Characters next to each other in a 


character set are printed in a column on 
the screen. 

The listing uses a non-standard char- 
acter set for clarity. Where you see 
normal characters, that means that those 
are USR graphics characters. To move _ the 
saucer up or down, USR is changed by one. 
To move right and left, the start of USR 
characters is poked by 168 which shifts it 
one complete CHR$ set. Every eight shifts, 
horizontal or vertical, the printing 
position is changed and the USR CHR$ are 
reset to the start. Just for fun, by 
pressing either "L" or "R" an automatic 
movement takes place which can be stopped 


with "S". The arrow keys move the ic 


manually. 

Sprites guzzle memory, but can make 
impressive animations. Try the following 
program and use it's fundamental ideas for 
your own program. When you RUN the 
program, press enter when the characters 
stop forming. Happy saucering! 

John Monkus 


= 
= 
= 
= 
<= 
= 
= 
z 
33 


» ee 


Kempston, Another Spectrum Disk Interface 


I have been using the Kempston disc 
drive interface on one of my TS 2068's 
since early October and I am extremely 
pleased with the results so far. The 
Kempston disc interface is intended for 


use on the Spectrum, In order to use it on 
a TS 2068, one needs to use a Spectrum BUS 
adaptor. I've been using the one made by 
Doug Dewey for use with the 
Microdrives. 

The disc interface is currently avail- 
able in the US from English Micro 


Spectrum 


Connec- 


tion for $119.95, or with a BUS adaptor to 
fit a TS 2068, $129.95. I have found that 
the disc interface will not operate with 
an Emulator, and therefore a Spectrum ROM 
or ROMswitch is required for your TS 2068. 
With the disc interface attached, the TS 
2068 hangs up in the 2068 mode if you try 
using an emulator. 

The Kempston disc operating system, 
known as KDOS, is ROM based and eliminates 
the need to boot from a system disc. I'm 
told that when the disc interface is used 
on a Spectrum, the KDOS system message 
comes up when the Spectrum is turned on. 
When using a TS 2068, it is necessary to 
press the interface reset button after 
powering up before the KDOS system message 
will appear. 

The interface is housed in a_ small 
black housing which is simply the standard 


Kempston joystick interface housing 
designed to match the styling of the 
Spectrum +. The interface is designed to 


lie flat, unlike the earlier Kempston 
interface box which was vertical in 


design. The disadvantage of this is that 
when the disc interface is attached to the 
back of the Spectrum BUS adaptor board, it 
adds considerably to the depth of the TS 
2068. 

Also, the interface does not have a 
feed through connector. Therefore, some- 
thing like a Currah u-slot or a Kempston 
three-way connector is required if you 
want to add a printer interface as well. I 
solved this problem by glueing an 
additional edge connector to the side of 
Doug Dewey's adaptor board and wired it up 
to the existing edge connector on the 
board. I've found the disc interface 
compatible with both Tasman and Kempston 
centronics interfaces. On top of the disc 
interface is a power on indicating LED and 
a reset button. The reset button is useful 
for clearing a program without the need to 
switch off the computer. 

With the disc interface attached, the 
large heat sink on the Spectrum adaptor 
board gets very hot. However, I have run 


the system for several hours at a time 
with no problems and the TS 2068 power 
supply stays comfortably cool. I think 


there could be problems using Spectrum BUS 
adaptors other than Doug Dewey's EMU-4 
which do not have such a large heat sink 
as his adaptor board does. 

I am using the interface with a 5.25 
inch single sided double density disc 
drive which gives me 200K of storage per 
disc. The Kempston interface is capable of 


supporting any standard single or double 
sided double density disc drives in 3, 
3.5, or 5.25 inch sizes. I chose 5.25" 


discs rather than smaller sizes because of 
their low price and easy availability. 


5.25 inch discs are advertised as low as 
50 cents each, although this usually 
requires the purchase of 50 or 100 discs 


at a time. I was content with purchasing a 
box of 10 generic discs for $14 at my 
local computer store. Also, 5.25 inch disc 
drives are easy to obtain and even brand 
new drives with case and power supply can 
be obtained for as little as $125. My 
drive is half height and takes up very 
little table top space. 

Up to four disc drives can be supported 
at one time. I borrowed a friend's disc 
drive and power supply which he pulled 
from his IBM XT. This second drive worked 
just as well as the one I purchased. 

I like the KDOS operating 
because disc commands are 


system 
standard 


Sinclair syntax preceded by a PRINT#4 
command. Thus to load or save a file 
called 'TONY', you would use PRINT#4: LOAD 
“TONY” and PRINT#4 : SAVE "TONY". I find 
this syntax easier to use than that(_) 
employed by the Sinclair Microdrives. If 
more than one disc drive is being used, 
the drive number must also be_ specified 
(if it is not specified, then the last 
drive accessed is assumed by default). In 
formatting discs, the drive number is 
always required. The command PRINT#4: CAT: 
PRINT 2 will CATalogue the contents of the 
disc on drive two. 

Two utilities are provided to help 
transfer files from tape to disc. PRINT#4: 
COPY will copy files one at a time from 
tape to disc and if necessary, add headers 
to headerless files. This routine does not 
change the syntax of tape files and 
therefore this has to be done to make 
programs run on disc. The copy routine 
cannot handle recent Spectrum software 
with hyperloaders and problems arise with 
long programs and _ those with non- 
relocatable machine code in REM state- 
ments because the KDOS system takes up 
some system memory (about 800 bytes). 

The other useful routine is PRINT#4: 
CLEAR Q which replaces all numerical 
values in a BASIC program by VAL 
statements thus saving a few bytes each 


time. This is useful in fitting a BASIC 
Program into the reduced memory space 
available. 

All these instructions are adequately 
explained in a rather small size 


instruction book which I had to copy in an 
enlarged format in order to read easily 
with my eyesight. 

I have found Interface III useful in 
transferring commercial software to disc. 
My technique is to make a tape copy of the 
software using Interface III. This results 
in a tape version with a simple two line 
loader. It is then only necessary to 
change the syntax of this basic loader to 
KDOS syntax and then about 50% of the time 
a working disc version results. I modified 
Tasword 2 basing my modification on a 
version for the Timex disc drives given by 
the L.I.S.T. user group. 


Why did I choose the Kempston disc 
system for my TS 2068? There are _ several 
reasons and perhaps a better starting — 


point is why choose a disc system at all? 
My reason came from my experience using 
Spectrum Microdrives. I have two TS 2068s 


and using Microdrives on one of them soon 
put me completely off cassette tapes. I 
was completely won over by the ease and 
convenience of fast file finding and 
loading. I soon got tired of using tapes 
on my other TS 2068 (as did my children! ) 
and decided to add a disc system to it. 
Any disc system I purchased had to work 
on the TS 2068 in Spectrum mode since most 
of my software is Spectrum and I want to 
have access to the 5000+ items of Spectrum 
software compared with the less than 200 
TS 2068 items, much of which is now 
outmoded. So since at the moment there are 
no disc systems switchable between 
Spectrum and 2068 modes, I had to go fora 
disc system designed for the Spectrum. 
Next it had to work on an adapted 2068. 
Not all disc systems designed for the 
Spectrum will do this. Finally, for 
reasons already discussed, I wanted to use 
5.25 inch discs. These considerations led 
me to the Kempston disc interface and two 
further considerations confirmed that 
choice. First, price: I was able to put 
together my system for $220 complete with 
a new dise drive. Secondly, future support 
of the system: Kempston seems to be one of 
the longer lasting and hopefully more 
stable suppliers of Spectrum hardware add 
ous. These considerations of mine will not 
apply to everybody, but I do think the 
Kempston disc interface should be 
seriously considered by anyone who wants 
to add mass storage to their 2068. 
Tony Brooks 


Workin’ in the 
Software Patch 


Our feature program this month is 
OMNICALC 2, the impressive spreadsheet 
program from Microsphere, Ltd. OMNICALC 2 
was reviewed in an earlier issue of SUM 
(volume II, Number 12). 

In my opinon, OMNICALC 2 deserves every 
bit of praise it gets. Advanced capa- 
bilities and ease of use places OMNICALC 2 
way ahead of any other spreadsheet at many 
times the price. 

Out of the box, OMNICALC 2 works with 
the TS 2040 printer. It can be used with 
full-sized printers too, but being a 
British program, it was designed with 
British printer interfaces in mind. 


What about those of us with AERCO, 
Oliger, or A & J printer interfaces? Can 
we configure OMNICALC 2 to use our full- 
sized printer? And better yet, can we 
somehow get full-sized printouts of the 
histograms that OMNICALC 2 can generate? 

Happily, the answer is YES to both 
requests. By following the procedure 
below, you will be able to make this 
"workhorse" of a program work even harder! 

You will need a copy of OMNICALC 2 
(program: tom64000 in particular), and a 
copy of ZPRINT 80. ZPRINT 80 is the new 
printer support package from Zebra 
Systems, Inc. 

I have a MEMOTECH DMX80 (Panasonic KX- 
P1090) printer and an AERCO printer 
interface. The Program can easily be 
modified for your particular needs. 

First, type in the following "loader": 


1 CLS: PRINT AT 0,10;"“OMNICAL 
C 2+";AT 1,4;"(C) 1984 Microsphe 
re Ltd. ;AT 2.25" 1986 
Mountaineer Software" 

2 INK 7: LOAD ""CODE 

3 POKE 64012,132: RANDOMIZE JU 
SR 64000: POKE 23728,1: LPRINT C 
HR$ 15;: POKE 23728,0 

4 LOAD *" 


Line 3 sets the LPRINT width at 132, 
initializes the print driver, and sets the 
printer to condensed print. Next SAVE this 
to a blank tape with: 


SAVE "omni2+"LINE 1 


Once you save the loader, stop the tape 
and set it aside. Next, NEW the computer 
and LOAD ZPRINT 80. Select the high memory 
version (zprnt-hi), and follow the prompts 
to configure it to your printer/interface 
combination. 

Save this driver on your tape following 
the loader. Finally, transfer "tom64000" 
to this new tape. This can be done either 
with a "tapecopy” program like 
TRANS-EXPRESS if you have a Spectrum 
emulator installed, or by going tape-to- 
tape. And that's it, OMNICALC 2+ is born! 

A few comments on using this program: 
--- Make sure that your printer is turned 
on when you LOAD “omni2+". Once the print 
driver is loaded, it will initialize the 
printer only if it is on. 

--- With the condensed print, you can 
print up to 15 columns across on a normal 
80 column printer. 


--- To utilize the graphics capabilities, 


you need to set OMNICALC 2's graphic 
address. This is done with the "x! 
command, followed by pressing 'G', and 
entering the number 64009 to the 
“address?" prompt. 

- Remember that once you use the 


Graphics command to print out a histogram, 
the program resets itself to normal size 
print. To print in condensed print again, 
you will have to re-LOAD -“omni2+". 
Hopefully the next revision will solve 
this small problem. 

I want to publicly thank Karl Smith for 
all of the help and guidance he provided 
me with to make this "patch" possible. You 
can reach Karl at: 

Karl Smith 
40 White Ct. 
Pataskala, OH 43062 


I hope you find this "patch" helpful. 
If you come up with any more modifications 
for OMNICALC 2 (or any 2068/Spectrum 
program for that matter), drop me a line: 
Bill Ferrebee 
Mountaineer Software 
749 Hill Str. #6 
Parkersburg, WV 26104 


NOTE: OMNICALC 2 ($24.95) and ZPRINT 80 
($19.95) are both available from: 
E. Arthur Brown Company 
3404 Pawnee Dr 
Alexandria, MN 56308 
(612) 762-8847 


Until next time, take care! 
-- Bill Ferrebee 


VU 


Review: ZPrint 80 Universal Print Driver 


Have you ever wanted to be able to 
modify a favorite program so that it would 
utilize your full-sized  printer/inter- 
face combination to print out information? 
Or get a full 8 1/2 X 11 inch screen dump 
in color (sort of)? And do it in either 
2068 or Spectrum mode? 

Well, now thanks to Zebra Systems, you 
can accomplish all these...with ZPRINT 80. 

ZPRINT 80 is a new "Universal Print 
Driver" software package that will modify 
itself to work with any of these popular 
Centronic printer interfaces available for 
the 2068: Aerco, Tasman, Oliger, A & J. 


ZPRINT 80 will give you LLIST, LPRINT, 
and normal size COPY facilities on any 
parallel dot-matrix printer. Also, you can 
get a full-size grey scale "color" screen 


copy using any of the following printers: 
Gemini 10X & SG10 
Memotech DMX80 
Panasonic 1090/1091 
Epson FX/RX 
Mannesman Tally Spirit-80 
Prowriter 8510 


Any picture you can generate on the 
screen can be copied, pixel for pixel, 
sideways on a full sheet of paper. ZPRINT 


80 uses a grey scale, from white to black, 
to simulate a color picture. The procedure 


takes about five minutes, and the results 


are amazing. 


All of the other necessary features of \_) 


a good print driver are also included. 
Print widths can be changed, linefeeds can 
be turned on or off, and print control 
codes can be added easily. This will allow 
you to use your printer's various print 
fonts. 

ZPRINT 80 is provided in four versions: 
high memory (64000) and low memory (27000) 
for both the 2068 and Spectrum. 

The only shortcoming I 
ZPRINT 80 is the lack of 
If ZPRINT 80 could be inserted at any 
memory location, like Jack Dohany's 
relocatable Aerco print driver, it would 
be the ultimate utility. (Maybe Jack could 
work on it???) 

Overall, Zebra Systems has done it 
again! ZPRINT 80 is the print driver we 
have needed all along. I am indebted to 
them for taking the time to make using our 
T/S even more enjoyable. 


can see with 
relocatability. 


-- Bill Ferrebee 


OP 


ie 


iy 
cL 


Eiatintat 


“a gnkgiig aint han tg Hahaha tgtaty tat 0.8.08 


ahah ARCA ACR A RNA Rn, 


‘aca nnn Ann 


‘san ee, 
RRR RRR RR RY 


Patatatn anata at 
eter eee sees he 


seactatatntataatatatetaet 


eee a eee eee ek ky 


senosteeteeteet 


Two sample printouts using ZPrint80 (reproduced at reduced size). 


The Heart of the Sinclair QL. . .the 68008 


There is great confusion about the QL. 
The question is: in which computer 
category does the QL fall? The 32, the 16 
or the 8-bit computer!?! It depends on the 
point of view. For now, we can say that 
the microprocessor, the MC68008, which is 
the heart of the QL, is an 8/32-bit type. 

The microprocessor or the Central 
Processing Unit (CPU) is the nerve center 
of all activities in the computer system. 
It has generally 3 major tasks: 

1-Control of operations 
2-Interpretation of data 
3-Execution of instruction 


But a CPU alone is not very useful. The 
CPU needs memory and some peripherals to 
communicate with the outside world. The 
communication is possible via a computer 
BUS made up of multiple connectors which 
carry information to or from the CPU. A 
computer has generally three main bus 
types: 

l-Address bus 
2-Data bus 
3-Control bus 


Until now, most home computers were 
built around an 8-bit CPU. (8-bit CPUs are 
designed to work on 8-bit words at a 
time.) The two most popular of these were 
the Z80 (ZX81, TS2068, TANDY) and the 6502 
(C64, ATARI). The 68008 of the QL is, like 
we previously called, an 8/32-bit because 
it has an 8-bit wide data bus and works 
internally on 32-bit words. On this point, 
the 68008 is similar to the INTEL 8088 
(IBM PC) which is an 8/16-bit CPU because 
of its 8-bit data bus and 16-bit internal 
structure. Apple's Macintosh is a 
16/32-bit with its MC68000. 


MC68008 vs MC68000: THE HARDWARE SIDE 


The MC68008 is the “economical version" 
of the MC68000. In fact, the MOTOROLA's 
68000 series forms a real family. The 
68000, itself, has a 16-bit wide data bus, 
the 68008 has an 8-bit one and the 68020 


has the 32-bit wide data bus. The 
"advantage" of the 68008 over the other 
members of the family is, like we said, 
economical because the most commonly 
available low cost support chips are 
organised on an 8-bit basis. This means 


that these can be more easily designed 


10 


into a system around the MC68008. Also thel ) 


necessary connectors are smaller on 8-bit 
data bus systems than on a 16-bit data dus 
systems. 

The address bus has been reduced on the 
68008 to 20 address lines (24 on the 
68000) and 3 of the 68000's control 
signals are not directly present on the 
68008. These omissions are justified by 
the fact that the 68000 is a 64-pin I.C. 
and the 68008 is a 48-pin I.C.. With 20 
address lines, the QL can address directly 
1MB of memory. There is no need here for a 
complicated BANK SWITCHING system like on 
the COMMODORE 128 and ATARI 130XE. On the 
QL, all the memory is accessible anytime. 


The 68000 has 2 pins not present on the 
68008, UDS (upper data strobe) and LDS 
(low data strobe), but on the 68008 the 


pin DS (data strobe) does the same job. 
Also the VMA (Valid Memory Address) is not 
Present, an external circuit is required 
here to simulate it. 


MC68008 vs MC68000: THE SOFTWARE SIDE 


The 68008 has the SAME instruction set 
as the other members of the 68000 ' family. 
With only 56 instruction types and the 14 
different addressing modes, the programmer 
can access up to 1000 powerful in- 
structions. These instructions can be from 
1 to 5 words long, that is 2 to 10 bytes 
long. The 68008 (like the 68000) has 17 
all-purpose 32-bit wide registers, one 
16-bit FLAGS register and a 32-bit Program 
Counter. The 32-bit all-purpose registers 
means SPEED because complex operations can 
be carried out internally to the 68008 
with the minimum need of data to or from 
memory. Each one of the all-purpose 
registers can be used like an Accumulator 
and we can do operations on 1 bit, 4 bits 
(DIGIT), 8 bits (BYTE), 16 bits (WORD) and 
32 bits (LONG WORD). 

In conclusion, if you love machine code 
programming then the Sinclair QL is 
certainly a good choice. -- REAL GAGNON 

544 Hermine #2 
Quebec, Quebec 
CANADA GIN 2G6 


Editor's Note: Mr. Gagnon is the editor of 
SIN, “the only French North American 
Sinclair oriented magazine". 


a a 


Reviewing Two TS-1000 Programs 


DISTACALC 

Basically Programming 
2528 West Olive Avenue 
Fullerton, CA 92633 

16K TS/1000, 1500; $12.95 


Were you ever taught while in school 
that an airplane flying from the United 
States to the Soviet Union flies over the 
North Pole? The principle involved is that 
of the Great Circle route. The concept 
flies in the face of common perception. It 
is shorter to travel what appears to be a 
curved path instead of a “straight line" 
when traversing great distances across the 
globe. 


Navigators must regularly utilize the 
great circle concept wherein both the 
distance between two points and the 
direction to take can be calculated, All 


(?) that is needed is a good knowledge of 
non-Euclidean geometry and spherical 


coordinate systems...or a computer with 
the right software. 

DISTACALC is the right software if 
"close" is good enough. The program 


calculates distance and direction along a 
great circle route from one point on the 
earth to another. It also estimates your 


present location if you know the point 
from which you departed and the direction 
and distance you traveled. 

I asked Distacale the distance and 
direction from Memphis to Nashville and 
back. Both cities are stored in the 


Distacalc database. The database is a list 
of 107 worldwide cities whose latitude and 
longitude are filed within the program. 

The results obtained were satisfactory. 
The distance was given in statute and 
nautical miles and in kilometers. In 
addition, the azimuth, the direction in 
degrees measured clockwise from north, 
told me which way to travel to get from 
one to the other. For the return trip the 
direction should have been 180 degrees 
different. It was in error by one degree. 

If the two points involved are not 
among those listed, then you can add them 
to the database. The name, latitude, and 
longitude must be entered. The file holds 
up to 200 locations. Individual cities can 
be deleted, or a new file can be started. 

The second option calculates your new 


11 


position if you know your former location 
(latitude and longitude) and the direction 
(azimuth) and distance (in nautical miles) 
you've traveled. The term for this type of 
calculation is “dead reckoning". I used 


the same two locations and the direction 
and distance of travel previously 
calculated to determine the accuracy of 


this option. 

The results were very close but not in 
perfect agreement. The calculation of my 
new position should have been identical to 
the latitude and longitude for each 
destination city. Instead it was off by 
one to two minutes. A "minute" is 1/60 of 
a degree. This translates into 1-2 miles 
of error for the 180 mile trip. 


In short the distances can be 
considered accurate calculations, while 
the directions are close estimations. The 


instruction booklet warns that this is the 

case. Use Distacale to plan your vacations 

but not to aim your ICBMs. (Editor's Note: 

since nuclear warheads generally clear 

quite an area, it's probably close enough 
for them, too!) 

-- Duncan Teague 

3308 Bluemont Drive 

Memphis, TN 38134 


RAIDERS OF THE LOST TOMB 


Ever wish you could visit Egypt with 
its tropical oases and trees, blowing 
desert sand, and ancient stone pyramids? 
In RAIDERS OF THE LOST TOMB, one can 
almost feel the burning sand sifting 
through your toes as one plays the game. 

Your mission is to find four sacred 
stone tablets scattered throughout five 
levels of a long-forgotten Egyptian 
pyramid, and return safely to the first 


room where you entered. 

Sound easy? Alas, as in most games, it 
is not. One must search 100 rooms (20 per 
level) and be on guard against bottomless 
pits, slithering snakes, ghoulish ghosts, 
and mummies that rasp in their tattered 
wrappings. However, one is armed with a 
limited number of knives which can be 
thrown at snakes and mummies to kill them. 

Other helps on one's travels’ through 


the tomb are warning messages which warn 


of possible impending doom up to one’ room 
away. Messages like "Ghosts nearby", "I 
hear snakes", "I feel a draft", and "I 
smell a mummy" warn of danger. Ladders are 
found to move up and down between levels, 
and, if you are lucky, one might find the 
rare blue ruby that has the power to 
instantly kill any wandering wrappings one 


Timex/Sinclair computers in 1983. The 
programs put out by this company are 
excellent, and try to use all of the 
features of a computer. Now, this same 
company produces programs for the 
Commodore 64. RAIDERS OF THE LOST TOMB is 


now available from JPR Software, P. 0. Box 
4155, Winter Park, FL 32793; 305/273-1126. 


. 


might run into. This program is for use on 16K ZX8ls, 
The game is made by Timeworks, which TS1000s or unexpanded TS1500s. Cost is 
stopped making games for the $6.00. 
Emergency Power for the 2068 
You never notice how often the power hole cut in the opposite end, and ran the 


goes off until you start fooling around 
with computers. A great majority of power 
interruptions go unnoticed in normal every 
day living. Unfortunately, that computer 
notices every one. The reaction is always 
the same. The screen goes blank and back 
come the opening copyright notice; gone is 
your program, data, document, or whatever. 

With the Timex 2068 the solution to 
this problem is simple: a battery back-up 
to the regular wall outlet along with a 
charging system that keeps the battery 
fully charged. 

Sound complicated? All you need are a 
few parts from your Radio Shack store and 
the battery. I happen to use two 6 volt 
8.5 A.H. Gel-cell batteries in series (for 
12 volts). These are really overkill. 
These just happened to be on hand and have 
run the computer for several hours when I 
forgot to turn the computer off. 

I used a Radio Shack plastic case and 
mounted the female power plug in one end, 
fed the wires for the male plug through a 


JACK 
RADIO sHACK# 274--[565 


CRI 


42:0 OHMS 


wires for the battery out the side. All 
other electronics are mounted in the box. 
Wiring is as shown in the schematic 
diagram. 

In normal operation, power is supplied 
from the 2068 power supply, through CR2 to 
the computer. If the power goes off for 
any reason, the battery continues to 
supply power to the computer through CR3. 
Diode CRl_ keeps the battery from 
discharging through the 2068 power’ supply 
and provides power through the 120 ohm 
resistor to keep the battery charged. This 
resistor will normally run warm. The one 
watt size was chosen to act as a fuse in 
case the battery shorts or puts too much 
load on the 2068 power supply. Better to 
replace a resistor than the power supply. 

Note: This circuit is intended to keep 
the battery charged and not to recharge a 
totally dead battery. To attempt to do the 
latter may destroy the resistor. 

-- Thornton Benson 
H.C.R. Box 4245 
Benson, AZ 85602 


PLUG 
tk 
CR2 RADIO SHACK 274-1568 


TO COMPUTER 


FROM @) 
POWER 


SUPPLY DIODES iN 4ooL 


SMOUNTED IN FLAST/C CASE 
RADIO SHACK*® 270-230 


GEL-CELL 


TE 


OM 


Reviewing Two Printers 


One of the first peripherals that most 
Timex/Sinclair owners purchase for their 
computers is a printer. Because the TS2068 
as well as the older TS1000 and ZX81 did 
not come with a printer interface 
built-in, The Timex 2040 printer was an 
especially attractive purchase since it 
required no other interface, and fully 
supported LPRINT, LLIST, and COPY on both 
series of computers. Its disadvantages 
were the use of thermal roll paper and 
only 32 characters per line. 

To allow users to go beyond the TS2040, 
various suppliers have introduced 
centronics parallel interfaces either as 
stand alone units or as part of another 
piece of hardware, such as a disk drive or 


microdrive interface. Current popular 
interfaces for the 2068 include the 
Tasman, Aerco, A & J, and Wafadrive. 

Here at SUM we use, or have used, a 


variety of full size printers with our T/S 
machines. As the prices of printers 
continue to drop, it becomes more and more 
practical (financially) for users to add 
one or another of the printers available. 
Here are a pair that we have some 
experience with, and are somet imes 
advertised in the pages of SUM. 


BROTHER DM-5 DOT MATRIX PRINTER. This 
little printer is a marvel. It has one of 
the smallest "footprints" of any fullpage 
printer I've seen. It is about 13" wide by 
7" deep and less than 3" tall. Compare 
this to a Gemini 10X at 13" by 12" by 6", 
typical for Epson type printers. This 
means that the DM-5 is almost portable; I 
say almost since it is not battery powered 
(though a battery powered version does 
exist). However, small size does not mean 
lack of quality. 

SUM obtained our DM-5 from Foote 
Software for about $150. The printer has 
BOTH a parallel and aé serial port, 
selectable by a set of dip switches. It 
comes standard with a typewriter style 
friction paper feed though a _ snap-on 


tractor feed is available as an option 


(py (adding the tractor increases the height). 


‘The ribbon is in an easy-to-install 
snap-in cartridge rated at about 1/2 
million characters. Speed in normal pica 
(10 cpi) is rated at 50 characters per 


13 


can 
print double-sized, condensed, underlined, 


second. In addition to pica, the DM-5 


bold, and super and subscripts. Using 
standard Epson software commands the DM-5 
runs happily with Tasword II, Quill, OCP 
Word Manager, and BASIC. 

I enjoyed very much the friction feed. 
It is one of the easiest I have ever used 
on a dot matrix printer, perhaps because 
friction feed is an afterthought on most 
printers of this kind, but standard on the 
DM-5. Standard 9 1/2" tractor feed or 8 
1/2" letter size paper feeds happily 
through with little shifting from top to 
bottom. 

The Brother DM-5 belongs to the same 
family as the Brother M-1009, M-1109, and 
Centronics GLP. Consequently, ribbons 
should be commonly available at office 
supply stores and others which stock 
computer supplies and printer ribbons. 

Certainly if you must travel with your 
computer, or have a very limited desktop, 
or must constantly be putting away your 
computer to make room for other things, 
the DM-5 is an excellent choice. 


SINCLAIR QL PRINTER. The printer which 
many purchase when they obtain their QL, 
the QL Printer is a serial interface, all 
black dot matrix printer with a very nice 


NLQ (near letter quality) printout in 
addition to its standard dot matrix 
output. In NLQ the print head goes over 


each line twice, the second time filling 
in the spaces between the dots which make 
up each letter. 

Like the Brother DM-5 above, the QL 
Printer basically acts like an Epson so it 


runs well with most software. As the QL 
computer comes standard with an RS-232 
interface, the printer can be used 


immediately without having to worry about 
dip switch settings, interfaces, etc. T/S 
users with a Sinclair Interface I may also 
use the QL printer with suitable cable. I 
have heard of some who have connected it 
to the RS-232 port available on the back 
of the Zebra disk drive interface, though 
I don't know if they have gotten Tasword 
II to output to that port yet. (Perhaps 
some of our readers can share their 
experiences with that particular serial 
port.) 

More traditionally 
Printer is rated at 100 eps in standard 
print mode, and 20 cps in NLQ mode. A 
pleasant surprise is the addition of an 
italic font to the standard fonts as 
listed with the DM-5 above. Opening the 
printer case reveals a tightly packed 
package with Seikosha SP80 plainly 
imprinted on the circuit board. This 
reveals what simple observation 
‘ confirms--the Radio Shack DMP-130 is 
basically the same computer though the 
Radio Shack is a different color and 
includes a parallel interface. Therefore, 
additional ribbons are as near as your 
local Radio Shack Computer Center. 


sized, the QL 


sinclair self-test 
Y*K+,—-—. 701234567389: ; <=>? CABCDEFGHIJKL 
K+,-, 70123456789: ; <=>? @ABCDEFGHIJKLM 
+,-./0123456789: ; <=>? @ABCDEFGHIJKLMN 


SUM readers who wish to see what the 
NLQ looks like are referred back to 
December 1985 SUM in which most of the 
first 17 pages of that issue were all done 


on the Sinclair QL Printer. We purchased 
our printer from the English Micro 
Connection though most QL dealers should 
be able to supply the same printer for 
$300-350. 

Loading the QL Printer is a little 


difficult when using the tractor feed, but 
it feeds fine once loaded. The friction 
feed also is a little tricky. A feed table 


on the back of the printer helps line up 
single sheets. A special lever on the 
right side of the computer will 
automatically advance a single sheet of 
paper into the printer so that’ the 
printhead is positioned about 1" down the 


page for beginning printing. 


14 


‘being sold by them for $124.95 plus 


We hope to review additional printers 
in future issues of SUM, including a 20 
cps daisy wheel printer and the Panasonic 
1080, each of which sell for $250-300 and, 
provide excellent value. WO 


— Vendor Report — 


The article last month on connecting 
the 2068 to a plotter has elicited a great . 
response from a number of readers, 
Peripherals Direct was listed as_ the 
source for the Amdek plotter. They now 
inform us that they are sold out of this 


model but still sell Amdisk III 3" disk 
drives (similar to Zebra's disk system). 
Their address is P. Q. Box 4301, 


Northbrook, IL 60065; 312/498-9244. 
However, SUM MAGAZINE has not let you 
down. We have discovered that LOLIR in 
Dallas, Texas has a 3 pen color plotter at 
a great price. The Sweet P plotter is 
$3.00 
for all technical documentation and $3.50 
shipping. But if you tell them that you 
learned about them in SUM MAGAZINE, the 
price is $109.95 (documentation & shippin 
still the same)! The man to speak to there 


is “Jerry". Lolir, 13933 N. Central #212, 
Dallas, TX 75243; 214/234-8032. They do 
accept Visa and Mastercard. That savings 


alone is worth a one year sub to SUM! 


VARIETY SALES/WORD SOFTWARE has a new 
address and phone number as well as a 
brand new catalog of TS2068 and QL items. 
Right now they ar featuring the new Tech 
Draw Jr. (jystick version) for $22 
postpaid. Tech Draw was reviewed in SUM 
back in August and reminded us of the 
Macintosh MacPaint program. Variety Sales, 
325 W. Jersey St. #2D, Elizabeth, NJ 
07027; 201/289-5699. 


THE FD-68 USER is a newsletter being 
produced especially for owners and users 
of TS2068 Aerco disk drive systems. Issue 
I features information on utilizing bank 


switching, and modifying Artworx and 
Pro/File 2068 so they will run on the 
Aerco system. Four issues per year are 
planned; no subscription price is listed. 


FD-68 User, David Hill, 1159 South Shoré_) 
Drive #12, Holland, MI 49423; 616/335-8726 
after 5:00 p.m. 


Recently we received G.U.T.S. (Grupo 
Usarios T/S), a users group newsletter out 


f Mexico (and all in Spanish). Th Mind 
see an er ie iuce ee eee in your own 


the TS1500 there along with the TS2048, 


SB 

TS2080, and 3" disk drives with CP/M. The b 
2048 is what we would call the "Portuguese usiness ae ee 
Timex" computer which briefly appeared 2 2 
here last summer. It is Spectrum ona Sinclair QL! 

tibl ith Kempston compat ible ; 
aye ek re The aBKe looks ies an Announcing INTEGRATED ACCOUNTS, the first 
smevicen TS2068 painted black and serious business accounting package for the Sin- 


clair QL. Designed for the small business person 
unfamiliar with computers but wanting or needing 
to computerize his bookkeeping and accounting 


shortened on the right side since the 
cartridge port has been eliminated. The 


2080 is apparently the same as _ the functions, this package possesses many of the 
Sinclair QL Printer being sold here in the functions and capabilities of software normally 
States. The 1500 is also black. Anyone found on much larger computer systems. Sales, 
interested in more information or a Purchases, and Nominal Ledgers right through to 
subscription. can write GUTS de Mexico, Profit and Loss and Balance Sheets. Power and 
Tlaloc #21, Col. Tlaxpana, CpP. 11370, ease of use have been combined to provide a truly 
Mexico, D.F. Everett Talavera is the superior accounting package for your QL. 
editor. Other serious business software also available 
such as Appointment Manager, Stock Control, QL 
The QL market continues to expand. Home Finance, QL Decision Maker, QL Project 
We've seen the new QL hardware and Planner, and Mailing List. Call or write for prices 
software catalog from ENGLISH MICRO and a catalog. 
CONNECTION and are really impressed with 2 ? ‘ 
the serious software, disk drives, and English Micro Connection 
even games that are now available. One 15 Kilburn Court — Newport, RI 02840 


/ very promising business package seems to 401/849-3805 


be the Integrated Accounting software 
which would allow business bookkeeping on 
the QL. Something like that along with 
512K of memory and dual disk drives would 
make an awesome accounting package for the 
price. English Micro Connection, 15 
Kilburn Court, Newport, RI 02840; 
401/849-3805. 


-- Richard Cravy 


ORDER BLANK 


0 | want to subscribe/extend (circle one) my subscription to SUM Magazine for one year. Enclosed is: 
0 $15.00 (U.S. only) O $18.00 (Canada & Mexico — U.S. funds) 


DO | want to order The Best of Sum at $11.95 postpaid. 


NAME 


Please do not order from earlier Order Forms as no 
back issues are currently available. 


Address 


| 

| 

| 

| 

| 

| 

| 

| 

| City/State/Zip 
al Expiration Date on label 

| 

| 


Make all checks payable to “SUM Magazine”’. All prices are postage paid. 
SUM MAGAZINE — 3224 NW 30 Avenue — Gainesville, Florida 32605 


curry 


“We know the QL ... We've been appreciating it longer.” 


computer 


QL Special #1 — $289.95 


>QL Computer-free ground shipping 

>WD Utility Prg. worth $16.95 > Free 2nd Day Air 

>Subscription QL Report $15.00 shipping! 

>8 Free programs including: ; 
— music program 


QL Special #2 — $299.95 
> QL Computer 


Both packages include the 4 


— windows demo 
— graphics pictures 
— calculator prg. 
— and more 


Psion programs. 

These same 4 prgs. are also 
avail. on the IBM and 
retail for $695.00. 


— Take 20% off the following if ordered at the same time: ICE, QSpell and/or Centronics |/F 


While other computer companies 
talk about bringing the power of 
computing within reach of ordinary 
people someday soon, the Sinclair 
QL puts extraordinary power into 
their grasp, today. The power of the 
32-bit architecture of the Motorola 
68008 microprocessor. Of 128K 
RAM, expandable to 640K. Of two 
built-in Sinclair Microdrives for 
mass storage. Of networking. Of 

a full-size QWERTY keyboard. 

And of an operating system that 
accommodates windows and even 
multi-tasking. 


The QL delivers up to 512 x 256- 
pixel full-color resolution or black- 
and-white display. It can be used 
with either a monitor or an ordinary 
TV. It has two RS-232C serial inter- 
faces and accepts joystick cursor 
control 


Included with the QL are four 
sophisticated, powerful and easy- 
to-use programs. A word processing 
program with the power and sim- 
plicity of dedicated word process- 
ing, that lets you print exactly what 
you see on the screen. A database 
management program with up to 
256 data fields, in which you can 


P.O. Box 5607 e Glendale, Arizona 85312-5607 e 1-602-978-2902 


Gg NS 


define relationships, extract data 
and reorganize it, do statistical and 
accounting calculations, and more. 
A spreadsheet program so simple 

to use you can do a complete 
“‘what-if"’ calculation in a single 
keystroke. And a graphics program 
with 32-bit speed to create spectac- 
ular and immediate effects for 
home or business. 


The price for all this power? That 
may be the QL's most powerful fea- 
ture of all. 


e Telex (via WUI): 6501267701 


OFFICE: 2412 West Greenway e Suite B-10 e Phoenix, Arizona 


16 


WEYMIL CORPORATION 


eeemakes a serious commitment to the Timex user in the development of high-quality, innovative, 
and user-friendly software, complete with layman-oriented documentation, and all at affordable 
prices. We are proud to offer you: 


-T HR U:S T * 


Finally, real graphics power for your TS 
1000! THRUST, the last word in 
cursor-controlled hi-res graphics for screen 
or printer output, is a software package 
composed of SincArtist HR and SincArtist 
1.3. Examine this sample for an idea of the 


t 
Ny 


= 
powerful versitility of THRUST. = 
SINCARTIST 1.3 - The original! Fantastic 7% ; 
hi-res graphics delivered to the 2040 a a 
printer, SincArtist 1.3 boasts excellent ¢ ) 


user-group reviews and is simply the best 
non-hardware system available. Note these 
features: 


192 X 256 high-resolution file displayed in a 48 X 64 screen window 

- Circles, triangles, rectangles, quadrilaterals, rays, inversing, and more 
40 redefinable patterns and a variety of draw and fill modes 

- Cursor or joystick control 

- No system modifications required 


SINCARTIST HR - The last word in cursor-controlled high-resolution screen graphics. Copy artwork 
to the 2040 printer and save to tape. SincArtist HR requires a TS 1000 with a_ socketed 2K RAM, 
less than $10.00 in parts, and a few minutes with a soldering iron. Super user-friendly 
documentation and instructions included. All modifications are fully transparent to other 
peripherals. » HUNTER BOARD OWNERS: All you_need is the FREE hardware upgrade that we providel!!!! 


THRUST includes SincArtist HR and Sinc-Artist 1.3 (these programs are not sold separately). The 
Ultimate Hi-Res Tape is available exclusively from Weymil Corporation for only $20. 


*MINI XMOD* 


MINI _XMOD - Allows your Westridge or Byte-Back modem to up and download Timex programs to any 
“Modem protocol BBS. 


- Fully documented with easy-to-follow instructions for the layman 

- 16K and 64K versions included 

- Ideal for storage in Hunter Board 

- Produced on high-quality casette for the ZX 81, TS 1000, and TS 1500 


MINI _XMOD is available from Weymil Corporation for only $20. Please specify Westridge or 
Byte-Back version. 


WEYMIL CORPORATION 
BOX 5904 
BELLINGHAM WA 
98227-5904 


(Write for a free catalogue of other TS 2068 and TS 1000 products) 


17 


NOW 
THE SINCLAIR QL 
HAS OUR 

FULL SUPPORT. 


Eoeerceceeea 
auseLoeu- 
al 


& 


At+Computer Response proudly announces their 
complete American support for the Sinclair QL and 
these fully authorized dealers: 


e Russell Electronics *« RMG Enterprises  ¢ T.E.J. Computer Products ¢ Sharp’s Inc. 


Red Mill Rd. 1419.5 Seventh St. 859 N. Virgil Ave. Route 10, Box 459 
Center Hall, PA 16828 Oregon City, OR 97405 Los Angeles, CA 90029 Mechanicsville, VA 23111 
814-364-1325 503-655-7484 213-669-1418 804-746-1644 

¢ Curry Computer ¢ Foundation Systems» Sunset Electronics * SCAD/ware 
5344 Banff Lane 17620 26 Mile Rd. 2254 Taraval St. Route 16, Box 37 
Glendale, AZ 85306 Washington, MI 48904 San Francisco, CA 94116 Church Creek, MD 21622 
602-978-2902 313-781-5800 415-665-8330 301-228-7910 

e Pyramid Electronics ¢ Harry S. Walters ¢ Knighted Computers ¢ Brice Road Pharmacy 
2174 Guif Gate Drive 101 Bassick Rd. 707 Highland St. 1653 Brice Road 
Sarasota, FL 33581 Trumbull, Ct. 06611 Fulton, NY 13069 Reynoldsburg, OH 43068 
813-922-9574 315-593-8219 614-861-3600 


A Computer [Response 


Prompt, Professional Sales & Service 


69-B Island St.¢ Keene, N.H. 03431 © (603) 357-1800 


18 


Now at last... 


The FootePrint Printer Interface 


The FootePrint Printer Interface was originally described in the January-March 1985 issues of SUM Magazine. 
Now improved and professionally built, it is available direct from the designer! FootePrint plugs into the 
cartridge slot of the TS-2068 and works with both Tasman (B and C) and Aerco print driver software. Just 
load the software and print. No POKES required. No modifications. 


® plugs into cartridge dock—door completely 
closes with cable running back under computer 


© for Centronics parallel printers 


® works in both 2068 and Spectrum mode 
e frees up rear edge connector allowing other 
peripherals to be used; less chance of a crash 


@ print driver software for LPRINT, LLIST, and 
COPY included for 2068 and Spectrum modes 


® compatible with OS-64 & Spectrum emulators 
@ EPROM socket and on/off switch on board 


® requires no modifications to computer 


FootePrint Interface w/software & cable 
FootePrint with OS-64 option included 
Bare board & instructions only 

Cable only for use with bare board 


$15°° postpaid 
$15°° postpaid 


All prices are pre-paid and include shipping charges. Florida residents must add 5% state sales tax. 


FOOTE %&%, SOFTWARE 
P. O. Box 14655 — Gainesville, FL 32604 
904/462-1086 (6 pm - 9 pm EDT) 


Sinclair QL 
Library 


The English Micro Connection has twelve (12) of 
the most popular English books written for the 
Sinclair QL. Each book covers a different aspect 
of the QL. Examples include machine code pro- 
gramming, advanced programming in Super- 
BASIC, using QDOS, Quill, Abacus, Archive, 
Graph, integrated applications, and practical 
programs. 


Each book is priced at only $9.95 plus shipping. 
Special Offer: one of each book (12 in all) at the 
low price of $99.95 and we pay the shipping! 
Contact us today for a complete description of 
the titles available. 


English Micro Connection 
15 Kilburn Court — Newport, RI 02840 
401/849-3805 


LARKEN 


DISK DRIVE ppg 7 
nurwcomaoein LOOP 


~ LDOS on Eprom supports Basic Programs, Code blocks and Arrays 
- Commands are-DIRECTORY,LOAD,SAYE,FORMAT, DELETE and EXIT 
- The Directory is maintained by the DOS, (no need for manual 
directory entrys as with some other disk drives) 
~ Up to 52 files per disk - Efficient use of disk space (no "pages") 
- Uses Shugart 455 or compatible 5.25" double sided drives 
- ZX-81 version can be converted to 2068 version and 
vice versa (cable and Eprom required). Data is even compatible 
- Capacity -160K per disk : Loads 32k bytes in 7.5 sec 
- Assembled and tested :60 day money back guarantee 
ZX-81 TS1000 features: 
- The most Powerful DOS for the ZX-81 : Very User Friendly 
- Dos uses 12K - 16K area: 2k RAM on disk controller 
~ Uses no ZX-81 RAM - No more ram pack wobble (ribbon cable) 
2068 Features : 
- Spectrum Emulator Compatible 
- Disk with utility programs included 
- Additional commands on disk 


Prices: $95.00 (US) for single drive controller 
$99.00 for 1 or 2 drive controller 
$4.00 for drive cable (all other cables included) 
include $5.00 shipping 
Send certified cheque or M.0. To - LARKEN ELECTRONICS 
(specify ZX-81 or 2068) RR#2 NAVAN ONTARIO 
CANADA K4B-1H9 


Now, you can build 
a QL system with 
Sila peripherals 


PUstsuruate 


sinclair 


Vision 


The optimum partner for business rc) 
personal use. 100 cps (draft)/20 cps (NLQ). 
New technology Letter Quality, QL matching 


‘The Sinclair QL with RS232 interface & cable. , pes 

with FREE ICE! The Sinclair Vision QL. 
OR ais 1 207 ne sa oe soe ort on atone owe as ies Designed to perform. 

eee 


Fe sheer good looks, superb design and 


high performance there is nothing to touch 


QL MON/DISA CARTRIDGE DOCTOR esha the Sinclair Vision QL colour monitor. 
QL TOOLKIT WD UTILITIES WES Developed in conjunction with Sinclair 
QL CHESS SPACE PARANOIDS QSPELL recta oe en ee ee we 
QL CAVERNS PAINT MASTER 12” non-glare tu , 85 column text display and 
high I col aphics is th fect 
QL TOUCH-N-GO BLAST BUGGY oe aoe mae Coe 
QL HOME FINANCE AREA RADAR CONTROLLER complete with lead and connector for instant 
se with the QL. : 
QL GARDENER QUAZIMODO = 
GALACTIC INVADERS & STAR GUARD SB EXTRAS 


a a 


PACKAGE DEAL= QL COMPUTER & ABOVE MONITOR & PRINTER w/cables $799.00 
=== DELIVERED ANYWHERE IN CONTINENTIAL USA !1! 


RSE a 


TO SAVE YOU EVEN MORE $$$S - WE OFFER YOU AN ADDITIONAL 10% OFF ON SOFTWARE 
WHEN YOU ORDER TWO OR MORE TITLES - - - WRITE FOR OUR FREE CATALOG 


HERE ARE JUST A FEW OF THE NEW TITLES WE'RE OFFERING : 


QL FLIGHT SIMULATOR $ 239.95 QL HYPERDRIVE S 15.35 

CITADELL $ 19.95 SPOOK § 19.95 BJ IN 3D LAND $§$ 19.95 

QL HOME FINANCE §$§ 24.95 QL GARDENER $24.95 PROJECT PLANNER § 40.95 
SUPERCHARGE BASIC COMPILER $§$ 79.95 TOOLKIT IT § 54.95 COSMOS $ 24.95 
VISA/MASTERCARD ACCEPTED SHIPPING & HANDLING CONT. USA $3.00 (TOTAL ORDER) 


SPECIAL - S&H FOR MONITORS & PRINTERS $7.50 (TOTAL ORDER) CONT. USA 


A KNIGHTED GOMPUTERS « 


707 Highland St 
Fulton. NY 13069 
(315) 593-8219 20 


from Knighted Computers 


=) 


a : 
‘ iJ 
a 
The monthly magazine with a natural blending of two 
popular hobbies — Ham Radio and Computers 
Oe Bea ag Yar lara eee acs: $15.00 for 13 issues 
Mexico, Canada 
Circulation Manager 
1704 Sam Drive 
Birmingham, Alabama 35235 
Phone 205/854-0271 
a QuarTerS 


A quarterly publication for the 


Timex/Sinclair computer user. 


"...Every issue has been full of helpful 
articles, great software reviews and new 
product information. Thanks for publishing 
a needed magazine for TS computer owners 
and for keeping it easy to. read and 
understand. I have read other TS computer 
magazines, but none have been as helpful to 
me aS QuarTerS...I'm really glad I 
subscribed to QuarTerS...''-C. Bower 


One year subs. only $8.00. Overseas 
only $11.00(US$). Check or MO to: 
WMJ DATA SYSTEMS, 4 Butterfly Dr, 
Hauppauge, NY 11788. 


eeoeereeveeeveeevseeeeeeeseeeee ee ee eee eeeseeeee 


. FREE FIRST ISSUE SUM . 


* Send this coupon to WJ Data Systems, 4 Butterfly ° 
* Drive, Hauppauge, NY 11788. You will receive oe" 
* free issee of QS and we will bill yu forace' 


* year subscription. If you do not want to subscribe * 
* write cancel on the bill and keep your free isste. * 
» NAME . 
»STREETL . 
eCITY . 
«STATE ZIP = 


TS Haritens 


Affordable Quality for the Timex Computer User 
Each issue brings you 40 pages of usable information, program 
listings, product reviews, programming articles, hardware projects, 
and applications for your computer. T-S HORIZONS features nation 
ally known authors like Paul Hunter, Gordon Young, and others. 
The price is ONLY $15.00 for a full year (12 issues) 

AND for a limited time only, new subscribers will receive our 
special telecommunications issue (#7, see below) “FREE” with 
their subscription. 


1S- 1000/1508 
BANK SWITCHING 4 


T$-2068 
PROCRAMS 
TPs “WORM ™- CONCLUDED 
POWER SUPPLY? 

Wen Coloma 


REVIEWS 
Rumors & Gossip 


* Byte Back Modem Review 
* 2068 Programming Tips 
* How a Compiler Works * Telecommunications for Beginner 
“ Book & Game Reviews “ Rotating Globe Routine 
Articles By Gordon Young and Paul Hunter * Sinclair Info. Net. 
* TS-1000 Power Supply - and more!!! 


IN T-S HORIZONS #7 IN T-S:HORIZONS #7 


f Enclose $15 (US) for 12-issue 


NAME | 

subscription, plus, “FREE” back WE 1 
ssue (while supplies last). 

| Canada, $25 other foreign. Extra ADDRESS I 
| back issue/sample:$2.00. ! 
I CITY ! 
H sc Rs HORIZONS ' 
H 2002 Summit Street STATE, ZIP i 
\. Portsmouth, Ohio 45662 SUM 4 satisFACTION GUARANTEED * ) 


Timex / Sinclair Owners... 


TAKE A LOOK! 


2068 - 1000/1500 - SPECTRUM 


* Readers nationwide 
(and Canada too!) 

* 36 Illustrated Pages 

* Published ‘‘On Time" 

* Interesting Articles / Programs 

* Current Information 

* Exclusive ''T/S Shopper’’ 
Guide 


$15 year 


SIX ISSUES SUBSCRIBE TODAY! 


SAVE $3.00 Off Newstand Price...Send Coupon (or a copy) 
with Check or Money Order for $15 (U.S. Funds Only) to 
address posted below. We will start your subscription right 
away upon receipt of your order. 


TME DESIGNS MAGAZINE COMPANY 
29722 Mult Rcd. eColton, Oregon 97017 


Name: 
Address: 
City / State. 


MORE RESOURCES FOR YOUR SINCLAIR 
FROM TIME DESIGNS MAGAZINE COMPANY... 
Contol Things The Offical O 
With Your 
Timex Sinclair TIMEX SINCLAIR 
By Robert L. Swarts | 2068 TECHNICAL MANUAL 


Put that spare T/S 1000 or ; 
1500 to work. Control! all Now in Stock! 
sorts of things around the 
house: turn on lights and 
appliances remotely, mon- 


avelections. Sulla a TECHNICAL 
This Book shows you ha, MANUAL 

plus many more projects. 
Also several chapters on 


how to write software for TIMEX SINCLAIR 
"controlling things." 2068 

While this book addresses PERSONAL 

the T/S 1000/ZX81, many 

applications would be of COLOR COMPUTER 


interest to the 2068 user 
as well. 183 illustrated 
pages. 
Only 
We have purchased the entire remainin 
stock from the publisher. When this 2 $5.00 
great book is gone, no more will be . 
published. Reserve you copy today! Postage Paid 
ZX81: 
Programming For Published by The Time Designs Magazine Co. 
Real Applications Jad Edition 
By Randle Hurley cane en ~ 
Includes 12 Software Programs y 
on a Cassette Tape Improvements 
* Full Color Cover 
i of zapping ne Want to 
really use your T/ 71500 or : 
2X81? Then this book and soft- * Spiral Bound 
ware package is for you. Many 
— practical programs to use on the 
b ciacletr. ser will do Speat® * More Readable 
jobs in a variety of environ- 
eates data-base, cig Text : 
/ programs, financial programs, : 
: ane 2 word processor. Book has * Reworked Diagrams 
pe '64 pages. and all ‘‘known 
corrections are made. 
Book and Tape 
C +1 tlabl i Geek <teres $6.00 We have recently acquired the exclusive publishing 
urren avalla ea [ele} A i 
nie ite he Leck at cour low price ccs Postage Paid rights to the 2068 TECHNICAL MANUAL from the Timex 


Corporation. This is the same reference manual 
they offered for a short time. However, our 
edition is an improved product. The 2068 TECHNICAL 
MANUAL Is for any T/S 2068 owner who is interested 


BOTH in hardware applications and advanced programming. 
“Control Contains a wealth of information, diagrams, charts 
. ” Send Check or M/O To: and a full-size schematic diagram of the 2068 PC 
Things ; board bound right in the book. Over 300 pages in 
d Sorry... No Credit Cards orders. all! We offer the 2068 TECHNICAL MANUAL for the 
an same price that Timex did. There manual was 
yey Gon ae photo-copied. Ours is professionally printed. 
Package TIME DESIGNS MAGAZINE CO. . 
For Only 29722 Hult Rd __ Colton, OR 97017 WY 
$10.00 Telephone: (503) 824-2658 Only $25 Postage Paid 


Postage 
Paid 


22 


640K! 


Maximum Memory 
for Your QL 


To take full advantage of your Sinclair QL you need 
to consider memory expansion. Our memory cards 
are equipped with an expander connector so that 
you can still connect a disk drive interface or other 
peripherals. Our 256K card will increase your QL’s 
memory to 384K. The 512K card increases memory 
to its maximum of 640K. 


Call for our special low prices on memory. Call or 
write for our new catalog of QL products. We carry 
disk interfaces, disk drives, expansion modules, the 
Mouse, modems, and the largest selection of soft- 
ware in North America. 


English Micro Connection 


15 Kilburn Court — Newport, RI 02840 
401/849-3805 


THE BEST OF 


pa 
saputer kit 


Sinclair Z881 personal co 


The 


= =) 
sinclair” | 


A compilation of the best articles, reviews, programs, 
and hardware projects up through December, 1985 


DIAMOND MIKE 


NEW MACHINE CODE 


2068/Spectrum compatible games called DIAMOND MIKE. 
It is a true arcade quality game with brilliant graphics, color 
and sound. The object is to collect enough diamonds before 
time runs out, while avoiding falling rocks, ferocious 
amebas and killer butterflies. There are 22 different 
screens and 6 levels! You get DIAMOND MIKE and 
CAVERN (a great space game we imported from Canada). 
Sale priced at $17.95! Ten day money-back guarantee! 
Just $2.00 extra for C.0.D. Or mail check or money order to: 
JRC SOFTWARE 
P.O. Box 448 
Scottsburg, IN 47170 
Phone (812) 752-5106 or 752-6071 


Diamond Mike is 100% 16K Machine Code! 


Now Available! 
“The Best of SUM” 


One of the most popular features of SUM Magazine 
has been our stockpile of back issues. But our stock- 
pile has been depleted. In its place we now have The 
Best of SUM — 112 pages of the articles, reviews, 
program listings, and hardware projects that have 
made SUM so popular — all taken from the first 3 
years of our publication. 


Some sample articles include: Building Your Own 
Spectrum Emulator, Repairing Your TS-1000, Word 
Processing Reviews for the 2068, UDGs on the TS- 
1000, Extensive Review of the Zebra Disk System, 
Adding a Keyboard to the 2068, and Enhancing the 
A &J Microdrive. 


Price: $11.95 postpaid 


Order from SUM Magazine, 3224 NW 30th Avenue, 
Gainesville, Florida 32605 


23 


TS 1000 


ae U.S. POSTAGE 
PAID 


Gainesville, FL 


REN LUTES 
17125 SE MARKET 
FORTLAND OR 977233